BETA - Screens Fixing

Screens - Fixing
Wall - Wetfloor - Tray - Bracing - Pole - Ceiling Blade
Wall Fixing There are various options for fixing the shower screen to the wall: Three edge clamps Minimal 17mm channel c/w gasket - 6mm adjustment Slim compensator profile - 22mm adjustment Click on picture for larger images
Three edge clamps	Minimal 17mm channel c/w gasket	Slim compensator profile

90 degree Bracket Brace

Compact solution will brace a short 100mm screen up to much wider ones. Ideal for where a door is hung from a narrow side screen.

Flush Mounting Channel

Can be used alone on a floor or wall instead of the slim (15 x 17 mm) edge channel or use together for discreet flush-glazed floor to ceiling aesthetic.
FMC 130 needs depth into tile of 13mm.
FMC 225 needs depth into tile or ceiling of 22.5mm.
C/W gasket for 6 or 8mm glass but no gasket for 10mm (use silicone)
Length 2000mm

Screen Fixing Bracket

Floor Fixing - Tiled Wetfloor Toe Pedestal The toe pedestal provides a clear drainage gap of 17mm onto the tiles, preventing grime & limescale. A 3mm pin locates in a blind hole drilled into the floor, then silicone the pedestal down. This avoids a screw penetrating the membrane. Set the screen 30mm inboard onto the slope so water drips away. The height adjustment - 10mm in-built. Click on pictures for larger images
130 mm Toe Pedestal	65 mm Toe Pedestal (diameter 19mm)	17mm Toe Pedestal
H Profile	Three Alternative Choices Silicone the screen onto the tray or the tiling Use the ‘H’ Profile & end cap (6 or 8mm only) Use the same slim edge channel as the wall (15 x 17mm) but no end cap is available Flush Mounted Channel - see Wall Fixing above

Floor Fixing - Tray
There are 3 options for fixing a screen onto a tray:

Silicone to Tray
Aluminium H Profile (see picture above)
Translucent Bottom Seal

Click on pictures for larger images

Bracing and Steadying Solutions There are 2 options for bracing and steadying a screen: Top Brace Two are available in ultra-slim 8mm diameter. A straight 1200 or bent 800mm Ceiling Fixing Floor to ceiling 800-2600mm full height. Short ceiling fix only 100-1170mm Click on picture for larger images
Top Brace	Top Brace on a Screen	Short Ceiling Fixing
Close-up of Floor-Ceiling Brace	Straight and Bent Top Braces	Short Ceiling Fixing
Floor to Ceiling Pole: A very secure solution for the outer edge of a frameless shower screen. Also provides a clear sight line for the visually impaired. No drilling of glass required simply clamps onto any screen of 6, 8,10mm. Polished stainless steel 44mm diameter x 3000mm, easily cut to length c/w hardened cobalt drill for attaching clamps to pole Click on picture for larger images	Floor to Ceiling Pole
Blade Ceiling Fixing Mounted from the top horizontal edge a very rigid ceiling fixing that virtually eliminates flexing whilst also being contemporary & minimal looking.
Ceiling bracket can be mounted to a flat or sloping ceiling of any angle, can also be inserted through ceiling into joist cavity with hidden bracket. Simple to reduce in length. Specify 6,8, or 10mm screen Note: Ceiling bracket can be reversed. Measures 40 x 8mm Lengths 275 & 1145 Click on picture for larger image